1.Ball nose special for cutting various curved surfaces and arc grooves

2.Since the ball edge is an S-shaped cutting edge, the cutting-in and cutting-out process is relatively stable.

3.Fast speed, high efficiency, smooth cutting, high precision, impact resistance, good finish and long life.

4.The ball blade is an s-shaped arc blade, and there is no sharp corner part on the blade, which will not cause local concentrated wear, and the tool has high durability.

5.Small-diameter ball-end and small-diameter flat-end milling cutters are designed with sharp rounded corners. Small-diameter ball-end milling cutters can reduce chipping and increase tool life.

6.The ball edge of the ball end milling cutter can be used for axial feed or lateral feed. It can easily process the cavity surface of the mold and other complex curved surfaces.

Production Process contact us

Product Performance contact us

Products Function contact us

1.HRC: HRC45 HRC55 HRC58 HRC60 HRC65

2.Coated: AlTiN, TiAlN, TiAISI,TiSiN, TiN, DLC,Nano, Diamond

3.Could be used for the processing of copper, cast iron, carbon steel, mould steel, stainless steel, titanium alloy, tool steel, and heat-treated steel

Package contact us

Step1: Milling cutter has been finished and sent to warehouse

Step2: One cutter put in a plastic pipe, 10 pieces per group bind with a rubber band

Step3: Use the air bubble paper to encase the plastic paper

Step4: Put the goods encased with air bubble paper in a small packing cartons

Step5: Put another air bubble paper on the goods and packaged

Step6: Sent by logistics company or express according to customer's need